Polyaspartic Floor Coatings

A polyaspartic floor coating is a fast-curing product that can get your facility back in production quickly. Polyaspartics exhibit similar performance characteristics to standard urethane topcoats, but exhibit quicker curing rates, allowing a shorter recoat window.

Polyaspartic floor coatings can be open to moderate foot traffic in as little as four hours after installation. In addition, these 100% solids, solvent-free coatings exhibit superior UV-resistance, good overall chemical and abrasion resistance, and very low odor.

We will work closely with our contractor partners to install the polyaspartic floor coating solution that meets your requirements throughout your facility.

New Call-to-action

PIP 4100 RC

Rapid-Curing Polyaspartic Coating & Traffic Line Striping
PIP 4100 RC is a 2 or 3-component (when pigmented), 100 % solids modified aliphatic/polyaspartic floor coating material that exhibits an extremely rapid cure, excellent UV resistance and has virtually no odor. PIP 4100 RC is ideal for use in small areas or traffic striping where it can be applied in a continuous line or phase with minimal seaming into a previous mix. PIP 4100 RC exhibits good resistance to the most common chemicals, has zero VOC’s and meets all USDA guidelines for use in federally inspected facilities.

Technical Data Sheets (TDS), Safety Data Sheets (SDS)

PIP 4300 PA

Polyaspartic Coating
PIP 4300 PA is a 2 or 3-component (when pigmented), 100 % solids modified aliphatic/polyaspartic floor coating material that exhibits fast cure, excellent UV resistance and has very low odor. PIP 4300 PA is an ideal coating for use in decorative applications where a rapid cure, UV resistant, low odor, high build coating is desired. PIP 4300 PA exhibits good resistance to the most common chemicals, has zero VOC’s and meets all USDA guidelines for use in federally inspected facilities.

Technical Data Sheets (TDS), Safety Data Sheets (SDS)