Urethanes
A urethane floor coating is typically used as a high-performance topcoat over an epoxy coating or existing urethane floor. Urethanes are ideally suited for production areas, show room floors, aircraft hangers, warehouses and other places where physical and chemical resistance combined with light stability are important.
Urethane floor coatings exhibit excellent chemical resistance, UV stability and light reflectivity. In addition, these coatings exhibit excellent resistance to hot or cold tire staining.
We will work closely with our contractor partners to install the urethane floor coating solution that meets your requirements throughout your facility.
PIP 2000 UR
Low-Odor, High Solids, High-Gloss Pigmented Urethane System
PIP 2000 UR is a high-solids, high-gloss, three-part, aliphatic pigmented polyurethane coating. It can be applied over an epoxy primer or used to recoat an existing epoxy or urethane floor. Suited for productions areas, show room floors, aircraft hangers, warehouses and other places where physical and chemical resistance combined with light stability are important.
PIP 2100 UR-Gloss
UV-Blocking, Low-Odor, High Solids, Clear Aliphatic Gloss Urethane
PIP 2100 UR-Gloss is a high-solids, two part, aliphatic clear polyurethane coating. PIP 2100 UR-Gloss is formulated to greatly reduce damaging UV rays from penetrating and yellowing an epoxy basecoat. PIP 2100 UR-Gloss is recommended as the clear finishing coat on decorative flake, quartz or metallic pigmented flooring systems.
Added abrasion resistance may be obtained with the optional DiamondWear additive or GlossGrip #10 additive. Addition of the DiamondWear Additive will result in a satin finish whereas the addition of GlossGrip #10 will maintain gloss and exhibit slight skid resistance and easily cleaned finish.
PIP 2100 UR-Satin
Low-Odor, High Solids, UV Protective Urethane System
PIP 2100 UR-Satin is a high-solids, smooth, satin, three-part, aliphatic polyurethane coating. It can be applied over an epoxy primer or used to recoat an existing epoxy or urethane floor. It may be applied as a clear coat rendering UV protection of underlying epoxy basecoats. Suited for productions areas, show room floors, aircraft hangers, warehouses and other places where physical and chemical resistance combined with light stability are important.
PIP 2000/2100-Series Spike
Accelerator Additive for Protect 2000/2100-Series Urethane Systems
PIP 2000/2100-Series Spike is a liquid accelerator that will speed the cure rate of PIP 2000 and 2100 Series Urethane systems. It is especially useful in situations where substrate temperatures are expected to be at the systems minimum temperature limit.
PIP 2200 UR
100 VOC High-Gloss Urethane System with UV Protection
PIP 2200 UR is the 100g/L VOC version of PIP 2100 UR. It is specifically formulated for use in geographical areas where maximum VOC restrictions are set at 100g/L for industrial maintenance coatings. PIP 2200 UR is a high-solids, high-gloss, two or three-part, aliphatic clear or pigmented polyurethane coating. It can be applied over an epoxy primer or used to recoat an existing epoxy or urethane floor.
PIP 2600 UR
Single Component Aromatic Urethane Coating and Concrete Sealer
PIP 2600 UR is an aromatic single component moisture cure urethane coating and concrete sealer. It can be applied direct to concrete as well as epoxy primed surfaces. It can be tinted at the application site or used as is clear. Surfaces coated with this coating gain chemical and abrasion resistance.